Whenever we are using the new router for our computers, they come with a default IP address which is 192.168.l.l, be it a wired router or the wireless one. If you are new to the configuration process of your router, then you may find it difficult to do it because there are certain steps that are required to follow to log in and set up the router with your system . Below we will be discussing the necessary steps to set up and log in the router.
How to Setup Wireless Router through 192.168.l.l:
Configuring the router and issues in accessing 192.168.1.1:
Configuring the router at the initial phase is what most of the people prefer to do, but despite following every said step and procedure there may be errors happening in it. 192.168.1.1 login Even if you are typing the correct IP address, there is a possibility of it showing the error. Further, we will discuss these issues and the steps for configuring the router.
- The first and main step is to check the connectivity of your LAN and WAN, your cables are insert in the correct port and your net card is functioning properly in your system.
- Do check if the power of your router is on, which you can see the blinking LED on the router itself.
- Once you have establish the connection, with the cables fixed properly, power being on, then it is important to check if the IP address is configure properly. To do this, go to start menu, then the Run menu, type CMD and press enter. When a box opens, types “ipconfig” in it. You will get a window with a lot of information in it, then check if the IP of the local connection is 192.168.1.x (x is the number in between 2-254), or the default getaway is 192.168.1.1, subnet mask 255.255.255.0.
- If the above IP is not mention in the window, then you need to configure it. Right click on the Network Neighbourhood and then select Properties, further find the ‘TCP/IP’ line, double-click for the modification of the IP, keep DNS to ‘obtain automatically’.
- Once you have entered the router configuration page, then go to ‘Network configuration’ and further in ‘WAN port settings’. In this, type the account name and password as given by your cable provider. If you are not able to access it then it is the time to call the customer service.
If you are still not able to connect to the internet, then try restoring the router settings by following the below steps:
- There is always a small hole near the power socket of the router. It is a very small hole that you will find, then you take a needle to some object which is as sharp and sleek as a needle. Then insert the needle in that tiny hole, press it for about three to five seconds and leave it. This will restore the settings of your router.
- Then you can log in to the router and reconfigure the settings ahead. Don’t forget to check the IP address of your computer as it should be same as your router.
- Once the router settings are default then open https://192.168.l.l.tips, now you should be able to work on it.
- If you are still facing the problem even after taking the above measures, then type ‘start – run – cmd’, and type ‘ping 127.0.0.1′, this will help in checking if your system’s network card is working.
- if the network card is working good, then there could be a possibility of your router being faulty, it is better to replace it.
- Even before replacing try to attach your router to another computer to check of really there is a problem with the router.
- If the connection is working fine with the other computer, then chances are that your computer might be having some problem with it.
Above steps cover almost everything which can help you with the setup and logging of your router.
Default Router Settings – 192.168.1.1 Router Username and Password:
During the manufacturing of the router, it is simultaneously configure with a default username and password. It can be easily found out on the back of the router where its printed and stuck on it. The font size of it may be quite small, so you need to ensure to pay attention to see it properly because to start the process of configuration you need this information in hand. If in case, you are not able to find it on the back of the router, do check the manual which comes with it because there it will be mention.
The most popular brands of routers like TP-Link, Linksys and Mercury generally have a default IP address programmed in it during the manufacturing process, this IP address is https://192.168.l.l.tips Being a standard and default IP address it is easier to remember, in case you forget it or want to check it you can always restart your router and then check the settings.
so that you might have understood all of the gear and requirements for login for your 192.168.1.1 wi-fi router. Router settings may additionally differ, however basic usually stay same. in case you are familiar with any one router manage panel, then you could handle and regulate any router control console. This content 192.168.1.1 Login admin will help you to login on your router middle panel and deal with its settings.